| MODEL | HLG-80H-24A |
| OUTPUT | DC VOLTAGE | 24V |
| RATED CURRENT | 3.4A |
| RATED POWER | 80W |
| RIPPLE & NOISE (max.) | 150mVp-p |
| VOLTAGE ADJ. RANGE | 10.8~13.5V |
| CURRENT ADJ. RANGE | Can be adjusted by internal potential meter or through output cable |
| 3~5A |
| VOLTAGE TOLERANCE | ±2.5% |
| LINE REGULATION | ±0.5% |
| LOAD REGULATION | ±2.0% |
| SETUP, RISE TIME | 2000ms, 80ms/115VAC at full load 1000ms,80ms/230VAC at full load |
| HOLD UP TIME (Typ.) | 16ms at full load 230VAC/115VAC |
| INPUT | VOLTAGE RANGE | 90 ~ 305VAC /127 ~ 431VDC |
| FREQUENCY RANGE | 47~63Hz |
| POWER FACTOR | PF> 0.96/115VAC,PF>0.96/230VAC,PF>0.94/277VAC at full load and rated output voltage PF > 0.9 at 65 ~100% load |
| EFFICIENCY (Typ.) | 90.5% |
| AC CURRENT | 0.85A / 115VAC 0.425A / 230VAC 0.4A/277VAC |
| INRUSH CURRENT (Typ.) | COLD START 70A/230VAC |
| LEAKAGE CURRENT | <0.75mA / 277VAC |
| PROTECTION | OVER CURRENT | 95 ~ 108% |
| Protection type : Constant current limiting, recovers automatically after fault condition is removed |
| SHORT CIRCUIT | Hiccup mode, recovers automatically after fault condition is removed. |
| OVER VOLTAGE | 14 ~ 17V |
| Protection type : Shut down and latch off o/p voltage, re-power on to recover |
| OVER TEMPERATURE | 85°C ±10(TSW1) |
| Protection type : Shut down o/p voltage, recovers automatically after temperature goes down |
| ENVIRONMENT | WORKING TEMP. | -40 ~ +70°C |
| WORKING HUMIDITY | 20 ~ 95% RH non-condensing |
| STORAGE TEMP., HUMIDITY | -40~+80°C,10~95% RH |
| TEMP. COEFFICIENT | ±0.03%/ (0 ~ 60°C ) |
| VIBRATION | 10 ~ 500Hz, 5G 12min./1cycle, period for 72min.each along X, Y,Z axes |
| SAFETY & EMC | SAFETY STANDARDS | UL8750, CSA C22.2 No. 250.0-08 (except for 48V, 54V), EN 61347 -1, EN61347-2-13 indep endent, IP65 or IP 67, J61347-1,
J61347-2-13approved ; design ref er to UL60950-1, T UV EN60950-1, EN60335-1 |
| WITHSTAND VOLTAGE | I/P-O/P:3.75KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC |
| ISOLATION RESISTANCE | I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25 / 70% RH |
| EMI CONDUCTION & RADIATION | Compliance toEN55015, EN55022 (CISPR22) Class B |
| HARMONIC CURRENT | Compliance to EN61000-3-2 Class C ( 50% load) ; EN61000-3-3 |
| EMS IMMUNITY | Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204, EN61547, EN55024, heavy industry level (surge 4KV), criteria A |
| OTHERS | MTBF | 357.8Khrs min. MIL-HDBK-217F (25°C ) |
| DIMENSION | 195.6*61.5*38.8mm (L*W*H) |
| PACKING | 0.84Kg; 16pcs/14.4Kg/0.54CUFT |
